Controlled-products-systems-group MVPDTEK Manual do Utilizador descarregar pdf (Página 3)

Technical Specifications

Power: The MVP detector operates across the 9V DC - 240V AC power

range.

Current Consumption: 19.2 mA @ 9 VDC 18.8 mA @ 12 VDC

17.3mA @ 24 VAC 9.5 mA @ 24 VDC

13.5 mA @ 115 VAC 11.0 mA @ 237 VAC

Temperature: -40F to + 180F

Environmental Protection: Circuit board is conformally coated

Enclosure: Extruded anodized aluminum,

Height = 3.25 inches 83 mm

Width = 2.56 inches 40 mm

Depth = 3.65 inches 90 mm

Output Relays: 1A/30V DC

Connector: 86CP11 compatible with 11pin Octal DIN rail mountable socket or

wire harness

Surge Protection: The detector is protected with neon discharge lamps, zenner diodes

and surge arrestors.

Loop Input: Transformer isotated

Grounded Loop: The loop isolation transformer allows operation with poor quality

loops.

Loop Inductance Range: 20 to 2000 microhenries with Q factor of 5 or higher.

Tuning: Detector automatically tunes to the loop after power application or

reset.

Tracking: Detector automatically tracks and compensates for environmental

changes

Power Indicator: Green LED solid light indicates power

Loop Failure Indicator: Green LED blinks indicates loop problem. DIP switch 4 set to fail

secure, Relay 2 may be used to act as loop failure output to control

board.

Loop Failure Memory: Green LED blinks with fast consecutive blinks indicates past loop

problem that healed.

Detect Indicator: Red LED solid light indicates detection

Extend Indicator: Red LED blinks after a car left the loop indicates time extend feature

Sensitivity: Set by ten position rotary switch

Frequency: Set by three position toggle switch

Infinite Presence Mode: DIP switch selectable presence

Limited 4 Minutes DIP switch selectable

Presence Time: DIP switch selectable

Second Presence Relay: DIP switch selectable

Pulse On Exit / Entry: DIP switch selectable

Fail Safe / Secure : DIP switch selectable

Filter: DIP switch selectable 2 seconds

Exteded Detection: DIP switch selectable 3, 6 and 9 seconds

1 2 3 4 5 6 7

Comentários a estes Manuais

Sem comentários

Controlled-products-systems-group MVPDTEK Manual do Utilizador Página 3

Comentários a estes Manuais

Manuais e produtos relacionados com Sensores Controlled-products-systems-group MVPDTEK