Controlled-products-systems-group 212ILW Manual do Utilizador descarregar pdf (Página 15)

212iLW/242iLW Standalone Keypad

Installation/Programming Manual

Document # 6050700, Rev. 1.1, D2d

6. Testing the Keypad

After installing the keypad, IEI recommends that you perform the

keypad self-test once a year, to ensure that the keypad works

properly.

1. To perform the self-test, with the unit powered up, press the

following keys on the keypad: 7890#123456*

• If all 12 keypresses are accepted, the keypad enters self-test

mode.

• The LEDs alternate green, yellow, and red followed by the

sounder beeping three times.

2. Verify that the master code works correctly. (The master code

accesses program mode and activates the main relay to verify

that the locking device is working.)

The default master code is 1234.

(If the default is not working, refer to section 9.)

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 27 28

Sem comentários

Controlled-products-systems-group 212ILW Manual do Utilizador Página 15