Controlled-products-systems-group 1520-080 Manual do Utilizador descarregar pdf (Página 20)

Page 20

The table list the many different print functions that the 1520 controller can perform. After each

function is complete, a long beep will sound.

3.1 Selective Transaction Print

In addition to the above print functions, the following programming sequence will print transactions for

a selected month and a selected day of the month.

1. Press *34 and then enter the four-digit master code (short beep).

2. Enter the month _ _ (01 = January, 12 = December) and then press * (short Beep).

3. Enter the day of the month _ _ and then press *.

4. The printer will start to print the transactions stored for the selected month and day.

When complete, a long beep will sound.

SECTION 3 – PRINT FUNCTIONS

Keypad Entry Function

*22 + master code Prints all card codes currently stored in the system memory.

*06 + master code Prints all facility codes currently stored in the system memory.

*40 + master code Prints time zone information currently stored in the system memory.

*32 + master code Prints the current date and time.

*02 + master code Prints the programmed relay strike time.

*27 + master code Prints the status of timed anti-pass back (On or Off).

*55 + master code Prints the size of the memory chip currently installed in the controller

(125, 500 or 1000).

*37 + master code Prints the transactions currently stored in the transaction buffer.

*31 + master code Prints the status of the real time print mode (On or Off).

1 2 ... 15 16 17 18 19 20 21

Sem comentários

Controlled-products-systems-group 1520-080 Manual do Utilizador Página 20