Controlled-products-systems-group 1506-080 Manual do Utilizador Página 15
- Página / 25
- Índice
- MARCADORES
Avaliado. / 5. Com base em avaliações de clientes
Page 15
Keep a record of the programmed codes by completing the tables on pages 24 and 25.
2.1 Master Code
The Master Code is a four-digit number that is used to access all programming functions of the digital
keypad. The default factory master code is set to 9999. We suggest that you program a new master
code once the system is installed. After programming the master code, write it down and keep it in a
safe place. If you forget your master code, you will need to program a new one before you can
access any of the programming functions of the digital keypad.
1. Open the cabinet and locate the Master Code switch on the circuit board.
2. Turn the Master Code switch ON.
3. Enter a four-digit code _ _ _ _ on the keypad and then press * (short beep).
4. Turn the Master Code switch OFF and close the cabinet.
2.2 Relay Strike Time
The relay strike time sets the amount of time that the relay(s) will be activated when a valid entry
code is entered on the keypad. The unit has two relays, both of which can be programmed with
individual strike times. Setting the strike time to 00 will activate the relay for ½ second. The factory
setting is 1-second.
1. Press *03 and enter the four-digit master code _ _ _ _ (short beep).
2. Enter the relay time in seconds _ _ (00 – 99) for relay 1, then press * (short beep).
3. Enter the relay time in seconds _ _ (00 – 99) for relay 2, then press * (short beep).
4. Press 0# together to end the programming step (long beep).
2.3 X-Strikes Programming
This keypad has a 3-minute lockout feature that is activated when “X” number of invalid entry codes
are entered on the keypad. The “X” strikes can be programmed from 1 to 9 invalid tries before the
lockout feature is activated.
1. Press *04 and enter the four-digit master code _ _ _ _ (short beep).
2. Enter the number of invalid tries before the lockout feature is activated _ (1 – 9), then
press * (short beep).
3. Press 0# together to end the programming step (long beep).
SECTION 2 - PROGRAMMING
- Owner’s Manual 1
- Table of Contents 5
- IMPORTANT NOTICES 6
- SECTION 1 - INSTALLATION 7
- 1.2 Wiring 9
- 1.3 Wiring Diagram 10
- Page 11 11
- Page 12 12
- 1.6 Slave Keypad Wiring 13
- Page 14 14
- SECTION 2 - PROGRAMMING 15
- Page 16 16
- Page 17 17
- Page 18 18
- 3.1 Four-digit Entry Codes 19
- 3.2 Five-digit Entry Codes 19
- 3.3 Request to Exit Input 19
- 3.4 Door Open Input 19
- 3.5 Hold Feature Operation 20
- 3.6 Time Zone Operation 21
- Page 22 22
- SECTION 4 - APPENDIX 23
- 4.2 Data Tables 24
- Page 25 25
- NAME 4-DIGIT 25
Manuais e produtos relacionados com Painel de controlo Controlled-products-systems-group 1506-080
(2 páginas)AEG FÖKOXLIM0P manuály
Uživatelské manuály a uživatelské příručky pro ne AEG FÖKOXLIM0P.
Poskytujeme 2 manuály pdf AEG FÖKOXLIM0P ke stažení zdarma podle typů dokumentů: Uživatelský manuál
Comentários a estes Manuais